1 x Pressure IN
CANopen Transmitter for strain gauges
µCAN.1.sg-TRS

The cable transmitter µCAN.1.sg-TRS is the universal data acquisition module for standard analogue full bridge strain gauge signals. The bridge is powered via the transmitter. The TRS family is ideally suited for being integrated directly in the measuring lines at a short distance from the sensor.
Features
- Strain gauge full bridge
- Voltage +/- 20 mV
- Supply voltage 4.5 V
- Accuracy 0.2% (FS)
- Resolution 16-bit (1 µV)
- Sampling rate 20 ms / 50 Hz
- Supply of the strain gauge full bridge
- Adjustable scaling
- Fieldbus CAN
- Protocol CANopen / Raw CAN
Further designs

µCAN.1.sg-BOX
1-channel analogue input strain gauge

µCAN.4.sg-BOX
4-channel analogue input strain gauge

µCAN.1.sg-SNAP
1-channel analogue input strain gauge

µCAN.4.sg-F1
4-channel analogue input strain gauge

µCAN.1.sg-SENSOR
1-channel analogue input strain gauge

µCAN.1.sg-BOX
1-channel analogue input strain gauge

µCAN.4.sg-BOX
4-channel analogue input strain gauge

µCAN.1.sg-SNAP
1-channel analogue input strain gauge

µCAN.4.sg-F1
4-channel analogue input strain gauge

µCAN.1.sg-SENSOR
1-channel analogue input strain gauge
Ordering information
1-channel strain gauge acquisition module with CANopen, 4-wire full bridge, signal type max. +/- 20 mV, 4.5 V bridge supply voltage, connection via M 12 circular connectors.
Downloads
Datasheet µCAN.1.sg-TRS
1-channel analogue input strain gauge
PDF [179 KB]
Manual µCAN.1.sg-TRS
1-channel analogue input strain gauge
PDF [719 KB]
EDS file
mcan1sg_trs.eds
EDS [20 KB]
Application Note AN1204
Setting of modul ID and bit rate via LSS
PDF [204 KB]
Order a sample module

Get a
sample module!
Any questions?

+49 2241 – 25 65 9 – 0
Write an email or call us.