4 x Analogue OUT

4-channel analogue output
Current / voltage

µCAN.4.ao-SNAP

MicroControl I/O module SNAP rail 4-channel analogue output CANopen or J1939 voltage current
Home 9 Portfolio 9 I/O Modules 9 SNAP 9 µCAN.4.ao-SNAP

The modul µCAN.4.ao-SNAP features 4 independent analogue outputs which optionally provide a voltage or a current signal. The CAN interface supports CANopen and J1939 protocols.

MicroControl I/O module SNAP rail 4-channel analogue output CANopen or J1939 voltage current (open casing)

4 analogue signals output: µCAN.4.ao-SNAP

Features

  • Voltage +/- 10 V
  • Current 0…20 mA
  • Accuracy 0.05 % (FS)
  • Resolution 16-bit (1 mV / 1 µA)
  • Signal output 1 ms / 1 kHz
  • Galvanically isolated fieldbus
  • Galvanically isolated analogue outputs
  • Signal type freely configurable
  • Screw connection via plug-in connectors
  • Protocol CANopen / Raw CAN / J1939

Further designs

Ordering information

Item no.
Description
10.42.007
µCAN.4.ao-SNAP

4-channel analogue output module, +/-10 V or 0(4)..20 mA and 16-bit resolution, for tophat rail mounting, CANopen interface (CiA 404) galvanically isolated. Signal wiring via screw plugs.

Downloads

Datasheet µCAN.4.ao-SNAP
4-channel analogue output current / voltage
PDF [193 KB]

Manual µCAN.4.ao-SNAP
4-channel analogue output current / voltage
PDF [1 .5 MB]

EDS file
mcan4ao_snap_v1r02
EDS [22 KB]

Sample order

Get a

sample module!

Any questions?

+49 2241 – 25 65 9 – 0

Write an email or call us.