8 x PWM

8-channel digital
Pulse width modulation output


MicroControl I/O module BOX 8 -channel PWM outputs CANopen (pulse widths)
Home 9 Portfolio 9 I/O Modules 9 BOX 9 µCAN.8.pwm-BOX

At its eight outputs the µCAN.8.pwm-BOX provides pulse width modulated signals (PWM) within a range of 0% to 100% for controlling of actuators (valves etc.). The outlets are overload and short circuit protected. The µCAN.8.pwm-BOX is connected with the central control unit via CAN bus.

MicroControl I/O module BOX 8 -channel PWM outputs CANopen (pulse widths) open casing

Output of PWM signals: µCAN.8.pwm-BOX


  • PWM output
  • Basic frequency 40 Hz … 5 kHz
  • Mark-to-space ratio 0.0 % … 100.0 %
  • Galvanically isolated fieldbus
  • Each output to be charged with max. 1.4 A
  • 3-wire connector terminal
  • Output drivers supplied separately
  • Status indication at each output
  • Protected against mechanical impact
  • Fieldbus CAN
  • Protocol CANopen / Raw CAN

Further designs

Ordering information

Item no.

8-channel pulse width output with CANopen, designed for metric cable connectors. High-side driver. Signal wiring via screw terminals.

Metric cable connection kit / 8-channel field modules.


Datasheet µCAN.8.pwm-BOX
8-channel digital I/O pulse width modulation output
PDF [246 KB]

Manual µCAN.8.pwm-BOX
8-channel pulse width output
PDF [605 KB]

EDS [19 KB]

Order a sample module

Get a free

sample module!

Any questions?

+49 2241 - 25 65 9 - 0

Write an email or call us.