1 x Analogue IN

CANopen Transmitter for Voltage and Current Measurement

µCAN.1.ai-TRS

MicroControl I/O module transmitter TRS 1-channel analogue input CANopen voltage current
Home 9 Portfolio 9 I/O Modules 9 TRS 9 µCAN.1.ai-TRS

The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface.

MicroControl I/O module transmitter TRS 1-channel analogue input CANopen voltage current (illustration of signal input and CAN supply)

µCAN.1.ai-TRS: Data acquisition in the measurement line

Features

  • Voltage +/- 10 V
  • Current 0(4)…20 mA
  • Accuracy 0.01% (FS)
  • Resolution 16-bit (1 mV / 1 µA)
  • Sampling rate 20 ms / 50 Hz
  • Sensor supply
  • Adjustable scaling
  • Fieldbus CAN
  • Protocol CANopen / Raw CAN

Related Products

Ordering Information

Item no.
Description
16.10.022
µCAN.1.ai-TRS / voltage

1-channel analogue acquisition module with CANopen. Signal type +/- 10V DC. Connection via M12x1 circular connector.

16.10.021
µCAN.1.ai-TRS / current

1-channel analogue acquisition module with CANopen. Signal type 0(4)...20 mA. Connection via M12x1 circular connector.

90.02.400
Y-cable distributor
90.02.401
Termination resistor M12

Downloads

Datasheet µCAN.4.ai-TRS
1-channel analogue input current / voltage
PDF [183 KB]

Manual µCAN.4.ai-TRS
1-channel analogue input current / voltage
PDF [719 KB]

EDS file
mcan1ai trs.eds
EDS [20 KB]

Application Note AN1204
Setting of modul ID and bit rate via LSS
PDF [204 KB]

Order a sample module

blank

Get a

sample module!

Any questions?

blank

+49 2241 – 25 65 9 – 0

Write an email or call us.