4 x Temperature IN

4-channel temperature acquisition module for PT100 or thermocouple with CAN interface

µCAN.4.ti-F1 / Pt100
µCAN.4.ti-F1 / thermocouples

MicroControl I/O module F1, 4-channel temperature input Pt100
Home 9 Portfolio 9 I/O Modules 9 F1 9 µCAN.4.ti-F1

The µCAN.4.ti-F1 is the universal measurement module for mobile acquisition of temperature data. Depending on the module type, resistance sensors as well as any kind of thermocouple can be polled at an overall sample rate of 4 kHz.

MicroControl I/O module F1 4-channel temperature input Pt100

µCAN.4.ti-F1 / Pt100

MicroControl I/O module F1 4-channel temperature input thermocouple

µCAN.4.ti-F1 / thermocouples

Features

  • Temperature thermo type K
  • Temperature Pt100, Pt200 (2- / 4-wire)
  • Temperature Pt500, Pt1000 (2- / 4-wire)
  • Accuracy +/- 0.05 K
  • Resolution 24-bit (0.001 °C)
  • Sampling rate 1.25 ms / 800 Hz
  • Parameterized via set-up software
  • Equipped with cold-junction compensation Casing powder coated
  • 1 bi-color LED status indicator
  • Fieldbus CAN
  • Protocol Raw CAN

Further designs

Ordering information

Item no.
Description
17.30.005
µCAN.4.ti-F1 / Pt100 / 200 / 500 / 1000

4-channel temperature signal acquisition, signal type RTD, sensor connector Lemo K series receptacle, power/CAN signal via Lemo B series receptacle, includes connecting element for stacking of several F1-modules.

17.40.005
µCAN.4.ti-F1 / Thermo

4-channel temperature signal acquisition, signal type thermocouple K, sensor connection via thermo plug-in connectors mini-style (code green), connection of Power/CAN via Lemo plug-in connectors B series, including connecting element for stacking of several F1-modules.

90.15.000
Foot / connecting element for F1 modules
90.15.001
F1/F1 connector (CAN + Power), length 140mm, Lemo B series connectors ( male ) at both ends
90.15.200
F1 terminal resistor for CANbus with Lemo connector
90.15.150
F1 connecting cable (CAN + Power), length 2m, with Lemo connector / SUB-D connector 9 poles, bare connector ends for power supply
90.15.100
F1 connecting cable (CAN + Power), length 2m, with Lemo connector / bare connector end
90.15.300
Sensor connector, Lemo K series FGG.0K.306.CLAC50, 6 poles, solder contacts, water tight
90.15.350
Power + CAN plug, Lemo F series FGN.0F.305.XLC, 5 poles, solder contacts, water tight

Downloads

Datasheet µCAN.4.ti-F1 Thermo
4-channel analogue input temperature
PDF [737 KB]

Datasheet µCAN.4.ti-F1 Pt100
4-channel analogue input temperature
PDF [737 KB]

Manual µCAN.4.ti-F1 (English)
4-channel analogue input temperature
PDF [744 KB]

F1 installer
version v1r10
exe [17 .6 MB]

Sample order

blank

Get a

sample module!

Any questions?

blank

+49 2241 – 25 65 9 – 0

Write an email or call us.