1 x Analogue IN
CAN / CANopen / J1939
Sensor Acquisition of Analogue signals
µCAN.1.ai-SENSOR
The sensor module µCAN.1.ai-SENSOR is designed to acquire an analogue signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances are adjustable. The sensor signal is linearized and monitored directly in the hardware.
Acquisition of an analogue sensor signal with CAN / CANopen / CANopen FD / J1939
Features
- Voltage ± 10 V
- Current 0 mA … 20 mA
- Accuracy 0.005% (FS)
- Resolution 16-bit (1 mV / 1 µA)
- Sampling rate up to 1 kHz
- Scaling adjustable
- Sampling rate adjustable
- Measurement range adjustable
- Operating temperatures -40°C to +85 °C
- Supply voltage 9 V DC to 36 V DC
- Fieldbus CAN Classic / CAN FD
- Protocol CANopen / CANopen FD / J1939
2-channel sensor connection
This device is also available as 2-channel sensor connection in different variants. Please contact us for more information and individual solutions.
Further designs
µCAN.1.ai-BOX
1-channel analogue input current / voltage
µCAN.4.ai-BOX
4-channel analogue input current / voltage
µCAN.1.ai-SNAP
1-channel analogue input current / voltage
µCAN.6.ai-SNAP
6-channel analogue input current / voltage
µCAN.4.ai-F1
4-channel analogue input current / voltage
µLAB.16.ai-19"
16-channel analogue input current / voltage
µCAN.1.ai-TRS
1-channel analogue input current / voltage
µCAN.1.ai-BOX
1-channel analogue input current / voltage
µCAN.4.ai-BOX
4-channel analogue input current / voltage
µCAN.1.ai-SNAP
1-channel analogue input current / voltage
µCAN.6.ai-SNAP
6-channel analogue input current / voltage
µCAN.4.ai-F1
4-channel analogue input current / voltage
µLAB.16.ai-19"
16-channel analogue input current / voltage
µCAN.1.ai-TRS
1-channel analogue input current / voltage
Ordering information
1-channel sensor acquisition module with CANopen to be integrated into sensors. Signal type ± 10 V. Connection by through-hole-technology (THT) in a 2.54 mm grid. Fieldbus: CAN / CAN FD. Protocols: CANopen / CANopen FD / J1939
1-channel sensor acquisition module with CANopen to be integrated into sensors. Signal type 0 mA .. 20 mA. Connection by through-hole-technology (THT) in a 2.54 mm grid. Fieldbus: CAN / CAN FD. Protocols: CANopen / CANopen FD / J1939
Downloads
Datasheet µCAN.1.ai-SENSOR
Analogue acquisition
PDF [185 KB]
Handout New Sensor Connection
PDF [88 KB]
Manual
µCAN.SENSOR
PDF [745 KB]
Sample order
Get a
sample module!
Any questions?
+49 2241 – 25 65 9 – 0
Write an email or call us.