4 x Analogue IN

4 x Analogue IN
Acquisition of voltages and currents

µCAN.4.ai-F1

MicroControl I/O module F1 4-channel analogue input Raw CAN voltage current
Home 9 Portfolio 9 I/O Modules 9 F1 9 µCAN.4.ai-F1

The µCAN.4.ai-F1 is the versatile universal measuring module for analogue standard signals. The module is designed to measure +/- 40 V or -20…+20 mA signals at an overall sampling rate of 4 kHz.

Modul µCAN.4.ai-F1 mobile Datenerfassung MicroControl

Mobile data acquisition of voltages and currents: µCAN.4.ai-F1

Features

  • Strain gauge full bridge
  • Voltage +/- 60 mV
  • Supply voltage 4.096 V
  • Accurany 0.01 % (FS)
  • Resolution 24-bit (0.01 µV)
  • Sampling rate 1.25 ms / 800 Hz
  • Parameterized via set-up software
  • Casing powder coated
  • 1 bi-color LED status indicator
  • Fieldbus CAN
  • Protocol Raw CAN

Further designs

Ordering information

Item no.
Description
17.10.005
µCAN.4.ai-F1 / voltage

4-channel analogue acquisition, signal type voltage +/-40 V, sensor connection via Lemo plug-in connector K-series, internal sensor supply Lemo plug-in connector, power/CAN connection via Lemo plug-in connector B series, including connecting element for stacking of several F1-modules.

17.20.005
µCAN.4.ai-F1 / current

4-channel analogue acquisition, signal type current -20...20 mA, sensor connection via Lemo plug-in connector K-series, internal sensor supply Lemo plug-in connector, power/CAN connection via Lemo plug-in connector B series, including connecting element for stacking of several F1-modules.

90.15.000
Foot / connecting element for F1 module series
90.15.001
F1/F1 connector (CAN + Power), length 140mm, Lemo B series connectors ( male ) at both ends
90.15.200
F1 terminal resistor for CANbus with Lemo connector
90.15.150
F1 connecting cable (CAN + Power), length 2m with Lemo connector / SUB-D connector 9 poles, bare connector end for power supply
90.15.100
F1 connecting cable (CAN + Power), length 2m with Lemo connector / bare connector end
90.15.300
Sensor connector, Lemo K series FGG.0K.306.CLAC50, 6 poles, solder contacts, water tight
90.15.350
Power + CAN plug, Lemo F series FGN.0F.305.XLC, 5 poles, solder contacts, water tight

Downloads

Datasheet µCAN.4.ai-F1
4-channel analogue input current / voltage
PDF [722 KB]

Manual µCAN.4.ai-F1
4-channel analogue input current / voltage
PDF [744 KB]

F1 Installer
Version v1r10
exe [17.6 MB]

Sample order

blank

Get a

sample module!

Any questions?

blank

+49 2241 – 25 65 9 – 0

Write an email or call us.