1 x Pressure IN
CANopen Sensor Acquisition of Strain Gauge / Pressure Signals
µCAN.1.sg-SENSOR
The sensor module µCAN.1.sg-SENSOR can be joined to all common pressure sensors and is designed to acquire an analogue sensor signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances can be adjusted with the module already built in. The sensor signal is linearized and monitored directly in the hardware.
µCAN.1.sg-TRS: Acquisition of strain gauge signals with 16-bit
Features
- Strain gauge full bridge
- Voltage +/- 20 mV
- Supply voltage 4.5 V
- Accuracy 0.2% (FS)
- Resolution 16-bit (1 mV / 1 µA)
- Sampling rate up to 200Hz
- Supply of the strain gauge full bridge
- Scaling / sampling rate adjustable
- Measurement range adjustable
- Operating temperatures -40…+85 °C
- Supply voltage 9…36 V DC
- Protocol CANopen / Raw CAN
Further designs
µCAN.1.sg-BOX
1-channel analogue input strain gauge
µCAN.4.sg-BOX
4-channel analogue input strain gauge
µCAN.1.sg-SNAP
1-channel analogue input strain gauge
µCAN.4.sg-F1
4-channel analogue input strain gauge
µCAN.1.sg-TRS
1-channel analogue input strain gauge
µCAN.1.sg-BOX
1-channel analogue input strain gauge
µCAN.4.sg-BOX
4-channel analogue input strain gauge
µCAN.1.sg-SNAP
1-channel analogue input strain gauge
µCAN.4.sg-F1
4-channel analogue input strain gauge
µCAN.1.sg-TRS
1-channel analogue input strain gauge
Ordering information
1-channel sensor acquisition module with CANopen to be integrated into sensors. Signal type +/- 20 mV. Equipped with solder pads for connection of plugin connectors.
1-channel sensor acquisition module with CANopen to be integrated into sensors. Signal type +/- 20 mV. M12x1 plug-in circular connector included.
Downloads
Datasheet µCAN.1.sg-SENSOR
1-channel analogue input strain gauge
PDF [185 KB]
Manual
µCAN.SENSOR
PDF [745 KB]
EDS file
mcan1sg_sensor.eds
PDF [20 KB]
Sample order
Get a
sample module!
Any questions?
+49 2241 – 25 65 9 – 0
Write an email or call us.