16 x Thermo IN

CANopen 19″-slide-in module
for test benches

µLAB.16.ti-19″ / RTD

MicroControl I/O module 19"-slide-in 16-channel input resistance temperature detector
Home 9 Portfolio 9 I/O Modules 9 19″-System 9 µLAB.16.ti-19″ / resistance temperature detector

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate.

MicroControl I/O module 19"-slide-in 16-channel input open casing

µLAB.16.ti-19″: Data acquisition in a 19″ slide-in module


  • Temperature Pt100, Pt200 (2- / 4-wire)
  • Temperature Pt500, Pt1000 (2- / 4-wire)
  • Accuracy +/- 0.5 K
  • Resolution 16-bit (0.1 °C)
  • Sampling rate 10 ms / 100 Hz
  • galvanically isolated fieldbus
  • Signal type freely configurable
  • Operating temperatures -40…+85 °C
  • Power supply voltage 9…36 V DC
  • Connection via circular plug-in connectors
  • Fieldbus CAN
  • Protocol CANopen / Raw CAN

Further designs

Ordering information

Item no.
µLAB.16.ti-19" / RTD

19" Slide-in for temperature acquition of 16 sensors Pt100 with CANopen, signal acquisition via DIN circular plug-in connector, 24V DC supply via Combicon 5-pole connector, CAN connection via 2 x M12 Binder socket/plug, 19" Slide-in ( incl. front plate without handles, fuse T2.5A for M12 socket/plug, factory calibration


Datasheet µLAB.16.ti-19″
16-channel temperature input / RTD
PDF [190 KB]

MicroControl Flyer I/O Modules
PDF [1 MB]

Sample order

Get a

sample module!

Any questions?

+49 2241 – 25 65 9 – 0

Write an email or give us a call.