16 x Analogue IN

CANopen 19″-slide-in
module for voltage measurement

µLAB.16.ai-19″

Home 9 Portfolio 9 I/O Modules 9 19″-System 9 µLAB.16.ai-19″ / voltage

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate.

µLAB.16.ai-19″: Data acquisition in a 19″ slide-in module

Features

  • Voltage +/- 10 V
  • Accuracy 0.01% (FS)
  • Resolution 16-bit (1 µA)
  • Sampling rate 5ms / 200 Hz
  • galvanically isolated fieldbus
  • Operating temperatures -40…+85 °C
  • Supply voltage 9…36 V DC
  • Connection via circular plug-in connectors
  • Fieldbus CAN
  • Protocol CANopen / CAN RAW

Further designs

Ordering information

Item no.
41.02.102
Description
µLAB.16.ai-19" / voltage

19" Slide-in for acquition of 16 analogue signals +/-10 V (input impedance approx. 500k Ohm) with CANopen, signal acquisition via circular plug-in connectors, 24V DC supply via Combicon 5-pole connector, CAN connection via 2 x M12 Binder socket/plug, 19" Slide-in (1.094.171.3.000001) incl. front plate without handles, fuse T2.5A for M12 socket/plug, factory calibration

Downloads

MicroControl Flyer I/O Modules
PDF [1 MB]

Sample order

Get a

sample module!

Any questions?

+49 2241 – 25 65 9 – 0

Write an email or call us.