1 x Pressure IN
CAN / CANopen / J1939
Sensor Acquisition of Strain Gauge / Pressure Signals
µCAN.1.sg-SENSOR
The sensor module µCAN.1.sg-SENSOR can be combined with all common pressure sensors and is designed to acquire an analogue sensor signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances can be adjusted with the module already built in. The sensor signal is linearized and monitored directly in the hardware.
Features
- Strain gauge full bridge
- Voltage ± 20 mV
- Supply voltage 4.5 V
- Accuracy 0.2% (FS)
- Resolution up to 16-bit (1 mV / 1 µA)
- Sampling rate up to 1kHz
- Supply of the strain gauge full bridge
- Scaling / sampling rate adjustable
- Measurement range adjustable
- Operating temperatures -40°C … +85 °C
- Supply voltage 9 V DC … 36 V DC
- Fieldbus CAN classic / CAN FD
- Protocol CANopen / CANopen FD / J1939
Two-channel sensor connection
This device is also available as 2-channel sensor connection in different variants. Please contact us for more information and individual solutions.
Further designs
µCAN.1.sg-BOX
1-channel analogue input strain gauge
µCAN.4.sg-BOX
4-channel analogue input strain gauge
µCAN.1.sg-SNAP
1-channel analogue input strain gauge
µCAN.4.sg-F1
4-channel analogue input strain gauge
µCAN.1.sg-TRS
1-channel analogue input strain gauge
µCAN.1.sg-BOX
1-channel analogue input strain gauge
µCAN.4.sg-BOX
4-channel analogue input strain gauge
µCAN.1.sg-SNAP
1-channel analogue input strain gauge
µCAN.4.sg-F1
4-channel analogue input strain gauge
µCAN.1.sg-TRS
1-channel analogue input strain gauge
Ordering information
1-channel sensor acquisition module with CANopen to be integrated into sensors. Signal type adjustable +/- 20mV DC. Equipped with solder pads for plug-in connectors
1-channel sensor acquisition module with CANopen to be integrated into sensors. Signal type adjustable +/- 20mV DC. M12 plug-in connector included
1-channel sensor acquisition module with CANopen to be integrated into sensors. Signal type +/- 20 mV. Connection by through-hole-technology (THT) in a 2.54 mm grid. Fieldbus: CAN / CAN FD. Protocols: CANopen / CANopen FD / J1939
Downloads
Datasheet µCAN.1.sg-SENSOR
1-channel analogue input strain gauge
PDF [185 KB]
Handout New Sensor Connection
PDF [88 KB]
Manual
µCAN.SENSOR
PDF [745 KB]
EDS file
mcan1sg_sensor.eds
PDF [20 KB]
Sample order
Get a
sample module!
Any questions?
+49 2241 – 25 65 9 – 0
Write an email or call us.