Single channel analogue acquisition
The cable transmitter in the protection category IP65 is configured to acquire an analogue signal.
The cable transmitter is directly integrated in the measuring wire. The analogue signals are transmitted to the µCAN.1.ai-TRS via relatively short lines. They are then digitalized and transmitted by CAN bus to a master.
Features
- acquisition of one analogue input at a resolution of 16 Bit for the standard signals ±10V, 0-20mA and 4-20mA
- Connectable via M 12 plug
- Standard-Protocol: CANopen DS-404
- indication of extravagating or falling below the measurement range
- extended ambient temperature range of -40°C...+85°C
Download
Datasheet µCAN.1.ai-TRS (PDF)
| |
Order
Number
|
Description
|
16.10.000 |
µCAN.1.ai-TRS
1-channel analogue acquisition module with CANopen. Signal type +/- 10V DC. Connection through M 12 plug. |
16.10.001 |
µCAN.1.ai-TRS
1-channel analogue acquisition module with CANopen. Signal type 0(4)-20 mA. Connection through M 12 plug. |
90.02.211 |
Y-cable distributor |
16.01.900 |
µCAN.1.ai-TRS
manual in German |
