4-channel strain gauge measurement: µCAN.4.sg-F1
- 4-channel strain gauge input: µCAN.4.sg-F1
The µCAN.4.sg-F1 is the ultimate data acquisition module for your mobile test bench. The module can handle strain gauges and each channel can be sampled with a maximum of 3 kHz sample rate. The gauge excitation is derived from the module.
Linearisation and monitoring of signals is done inside the robust alu die-cast housing. Data is send over the CANbus interface to the distributed logging station or laptop computer.
Features
- strain gauge (full-bridge), Ri > 350 Ohm
- strain gauge excitation 4.096V / ratiometrical measurement
- Sample rate max. 3 kHz per input
- working ambient temperature -40°C to +85°C
- CAN 2.0A and CAN 2.0B / RawCAN
- free software configuration tool
- protection class IP65
- status monitoring with dual-colour LED
Download
Ordering information
Order Number |
Description |
| 17.50.001 | µCAN.4.sg-F1 4-channel analogue acquisition module with CAN interface, signal input strain gauge, signal connector Lemo K series receptacle (female contacts), Power and CAN signal with Lemo B series receptacle (female contacts), inclusive 1 connection element, full bridges with Ri >= 350 Ohm. |
| 90.15.001 | F1/F1 connector (CAN + Power) length 140mm, Lemo B series connectors ( male ) |
| 90.15.100 | F1 external connector F1 cable connector 2mtrs. with Lemo B Series connector ( to F1 ) and open wire ( to interface of any other system ) |
| 90.15.300 | Sensor Connector F1 Straight Plug, FGG.0K.306.CLAC50, 6-pole, solder contacts |