Home > Products > I/O Modules > SNAP > 8 x temperature IN

CANopen Temperature Acquisition Pt100/Thermo - µCAN.8.ti-SNAP

The transducer unit µCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors. The integrated CAN interface supports CANopen and J1939 protocols, bit rate and node-ID may be set via DIP switches inside the device or via LSS.

Due to its small size of only 22.5 mm our temperature transducer is ideally suited for rail assembly in a control cabinet and may be combined with all other modules of the MicroControl µCAN-SNAP family via backplane bus.

Features

acquisition of thermal data with 16-bit resolution
Pt100 or J, K, L, R and T type thermocouples
wire break and short circuit detection
DIN-rail fastening TS35
protocol: CANopen CiA 301 and CiA 404
extended ambient temperature range -40°C .. +85°

Individual solutions

We would be pleased to manufacture individual modules or connection facilities according to your specific needs or develop additional functionalities for our control cabinet modules. Please contact us!

You are looking for a robust device for external applications? The module µCAN.4.ti-BOX is protected by a rugged aluminium casing (protection class IP66).

8-channel thermal data acquisition: µCAN.8-ti-SNAP

Downloads

Datasheet Rev. JDatasheet µCAN.8.ti-SNAP Temperature input199 KB
ManualµCAN.8.ti-SNAP, v1r001.0 MB
EDS fileCANopen EDS mcan8ti_th_snap_v1r02.eds30 KB

Contact

Ordering information

Order No.	Description
10.85.006	µCAN.8.ti-SNAP / no galvanic isolation 8-channel thermal data acquisition module for J, K, L, N, R and T type thermocouples. Bus interface CANopen without galvanic isolation. Signal wiring via COMBICON connectors.
10.85.005	µCAN.8.ti-SNAP / galvanic isolation 8-channel thermal data acquisition module for J, K, L, N, R and T type thermocouples. Bus interface CANopen with galvanic isolation. Signal wiring via COMBICON connectors.
10.85.103	µCAN.8.ti-SNAP / no galvanic isolation 8-channel thermal data acquisition module for Pt100 resistance temperature detectors. Bus interface CANopen without galvanic isolation. Signal wiring via COMBICON connectors.
10.85.104	µCAN.8.ti-SNAP / galvanic isolation 8-channel thermal data acquisition module for Pt100 resistance temperature detectors. Bus interface CANopen with galvanic isolation. Signal wiring via COMBICON connectors.

To top