4-channel strain gauge measurement: µCAN.4.sg-F1
The µCAN.4.sg-F1 is the universal measurement module for the acquisition of analogue standard signals. The module is equipped to measure strain gauge full brigde signals in four-wire technology at an adjustable sample rate of up to 3 kHz. Bridge excitation from the module by radiometric measurement.
Sensor signals are linearized and evaluated within the robust aluminium die-cast casing. The data is sent to a central processing unit or PC via CANbus interface.
- strain gauge (full-bridge), Ri > 350 Ohm
- strain gauge excitation 4.096V / ratiometrical measurement
- sample rate max. 3 kHz per input
- operating temperature -40°C to +85°C
- CAN 2.0A and CAN 2.0B / RawCAN
- free software configuration tool
- aluminium casing in IP65
- bi-colour LED for status indication
4-channel strain gauge acquisition module with CANopen, sensor supply 5V DC, 16-bit resolution, sensor connection via Lemo plug-in connectors K series, power / CAN conneciton via Lemo plug-in connectors B series, including connecting element for stacking of several F1-modules.
|90.15.000||Foot / connecting element for F1 modules.|
|90.15.001||F1/F1 inter connection (CAN + Power), length 140mm, Lemo B series connector at both ends.|
|90.15.200||F1 terminal resistor for CANbus with Lemo connector|
|90.15.150||F1 connecting cable (CAN + Power), length 2m, with Lemo / SUB-D connector 9 poles, bare connector end for power supply.|
|90.15.100||F1 connecting cable (CAN + Power), length 2m, with Lemo B connector / bare connector end.|
|90.15.300||Sensor connector, Lemo K series, FGG.0K.306.CLAC50, 6 poles, solder contacts, water tight.|
|90.15.350||Power+CAN connector, Lemo F series, FGN.0F.305.XLC, 5 poles, solder contacts, water tight.|