MicroControl F1 series, mobile CAN technology, different views of modules F1
Home > Products > I/O Modules > F1 > 4 x Pressure IN

4-channel Strain Gauge Measurement: µ

The µ is the universal measurement module for the acquisition of analogue standard signals. The module is equipped to measure strain gauge full brigde signals in four-wire technology at an adjustable sample rate of up to 1 kHz per input (4 kHz overall sample rate). Bridge excitation directly from the module by radiometric measurement.

Sensor signals are linearized and evaluated within the robust aluminium die-cast casing. The process data is sent to a central processing unit or PC via CANbus interface.


    • strain gauge (full-bridge), R > 350 Ohms
    • strain gauge excitation 4.096V / ratiometrical measurement
    • sample rate max. 1 kHz per input
    • operating temperature -40°C to +85°C
    • CAN 2.0A and CAN 2.0B / RawCAN
    • free configuration software
    • aluminium die-cast casing in IP65
    • bi-colour LED for status indication

    Individual Solutions

    Our well-established standard products solve most problems in a reliable way. Moreover, we would be pleased to manufacture individual modules or connection facilities according to your specific needs or develop additional functionalities for your field modules. Please contact us!

    Strain gauge full bridge measurement: µ
    MicroControl F1 modules µ



    Support: Any questions? Click here for the contact form or give us a call: +49 2241 256590

    Ordering Information

    Order No.


    17.50.002 µ
    4-channel strain gauge acquisition module with CANopen, sensor supply 5V DC, 16-bit resolution, sensor connection via Lemo plug-in connectors K series, power / CAN conneciton via Lemo plug-in connectors B series, including connecting element for stacking of several F1-modules.
    90.15.000 Foot / connecting element for F1 modules.
    90.15.001 F1/F1 inter connection (CAN + Power), length 140mm, Lemo B series connector at both ends.
    90.15.200 F1 terminal resistor for CANbus with Lemo connector
    90.15.150 F1 connecting cable (CAN + Power), length 2m, with Lemo / SUB-D connector 9 poles, bare connector end for power supply.
    90.15.100 F1 connecting cable (CAN + Power), length 2m, with Lemo B connector / bare connector end.
    90.15.300 Sensor connector, Lemo K series, FGG.0K.306.CLAC50, 6 poles, solder contacts, water tight.
    90.15.350 Power+CAN connector, Lemo F series, FGN.0F.305.XLC, 5 poles, solder contacts, water tight.

    To top

    MicroControl auf Facebook MicroControl auf Twitter MicroControl Blog