deutschenglish
Picture of a MicroControl µCAN-BOX module covered in dust in a cole mine
Home > Products > I/O Modules > BOX > 4 x Temperature IN

4-channel Analogue Input Temperature PT100 / Thermoucouple with CANopen - µCAN.4.ti-BOX

The µCAN.4.ti-BOX provides 4 inputs for measuring temperature sensors. Signals of resistance sensors as well as thermocouples may be acquired at a total sampling rate of 400 Hz. Sensor signals are evaluated and linearized within a rugged die-cast casing. The CAN interface supports CANopen and SAE J1939 protocols.

Features

The µCAN.4.ti-BOX digitizes measurement values of temperature sensors and provides these values in "degrees Celsius" at a resolution of 0.1 °C. Module address and bit rate may be adjusted either via dip switch or CAN bus (LSS, CiA 305). Auto bit rate detection is also supported.

  • CAN protocol: CANopen CiA 404
  • Die-cast aluminium casing, protection class IP66
  • Indication of device status and errors by two bi-color LEDs
  • Sensor break and short circuit detection
  • Integrated cold junction compensation (thermocouples)
  • Connection of 2-/3-/4-wire sensors (resistance sensors)

Connectivity

Up to 4 measurement sensors may be connected to the module, the sensor type is selected via CAN bus. On selecting the type of sensor the cold junction compensation for thermocouples will be activated automatically.

  • Platinum temperature sensors (Pt100, Pt500, Pt1000)
  • Thermocouples (type J, K, L, T)

Communications

The digitized temperature values of the µCAN.4.ti-BOX are transmitted via CAN bus. The bit rate of the CAN bus interface is adjustable within a range of 50 kBit/s to 1 MBit/s. A terminating resistor may be activated via a switch in the device. The CANopen protocol of the module complies with the CANopen standards CiA 301, CiA 305 and CiA 404. Both 11 bit identifiers (CAN 2.0A) and 29 bit identifiers (CAN 2.0B) may be used on the process data.

Individual solutions

Our well-established standard products solve most problems in a reliable way. Moreover, we would be pleased to manufacture individual modules or connection facilities according to your specific needs or develop additional functionalities for our field modules. Please contact us!

 

You are looking for a solution for control cabinets? Our 8-channel modules µCAN.8.ti-SNAP occupies only 22.5 mm o a DIN-rail.

Precise measurement of temperatures: µCAN.4.ti-BOX
MicroControl I/O module µCAN.4.ti-BOX
MicroControl BOX module with CANopen in IP66 open casing with DIP swithches
Logo CANopen
Measurement technology icon temperature Pt100
Measurement technology icon temperature thermocouple

Downloads

  • Datasheet Rev. FDatasheet µCAN.4.ti-BOX Temperature input251 KB
  • ManualµCAN.4.ti-BOX, manual 4-channel temperature measurement module1.4 MB
  • Application noteThermocouple measurement536 KB
  • EDS fileCANopen EDS mcan.4ti_box_v4r08.eds23 KB

Contact

Support: Any questions? Click here for the contact form or give us a call: +49 2241 256590

Ordering information

Order Number

Discription

12.43.005 µCAN.4.ti-BOX
4-channel thermal data acquisition module with CANopen, signal acquisition of J-, K-, N-, T-type thermocouples, Pt100, PT500 and Pt1000, 16-bit resolution, designed for metric cable glands, connection via screw terminals.
12.43.760 µCAN.4.ti-BOX / Thermo type K / sub-D
4-channel thermal data acquisition with CANopen, signal acquisition via thermo plug-in connector type K, CAN and power supply via sub-D 9 pole connectors.
20.10.008 µCAN.open.ER
Configuration tool for CANopen devices (free download).
90.01.114 Metric cable installation kit for 4-channel field modules.

To top

MicroControl auf Facebook MicroControl auf Twitter MicroControl Blog